Detecting the Signs of Water Damage in Your Bathroom

Although we use our bathrooms regularly, some people make an effort to thoroughly inspect them. However, you must check all of the components every now and then and repair or replace any damaged parts before a minor issue ends up being a big one. When it comes to home improvement items, an ounce of prevention is worth a pound of cure.

Where to Look in Your Bathroom for Possible Water Damage

The bathroom’s constant use of water makes it particularly sensitive to moisture buildup and subsequent water damage. However, you can prevent water damage by inspecting it frequently. Below are a few areas to look for water damage in your bathroom.

Walls

Check for any problems with the paint or wallpaper. To begin, run your hand along the wall, looking for any signs of moisture. Any moisture behind the wall could indicate a leak, which must be checked further. Read this for more information.

After that, check if the exhaust fan is functioning correctly. If the fan turns slowly because of built-up debris, clean it using compressed air from a can. Obviously, if the fan stops working, repair it immediately because your exhaust fan is your best protection against moisture damage.

Shower or Bathtub

Look for mold in the grout or lose pieces of the grout. As soon as possible, repair any places where the grout has fallen away. Next, inspect the showerhead and fixtures to ensure they remain in good working order and without rust or lime buildup. Make a note of any tile damage and check out the drain attentively. Finally, make sure the shower door seals securely and does not leak water onto the floor.

Toilet

The toilet is a little tricky because the area is limited, but get your flashlight out and carefully check the area surrounding the fittings and on the back of the tank for any signs of moisture. Also, inspect the tank for any leaks at the point where the tank joins the base.

A susceptible water junction is a toilet. Examine the water lines for leaks near the toilet seat, in the hose, and underneath the water tank. Check the toilet rim and tank seals for leaks if there are any traces of moisture on the floor around the toilet. Remember that deodorants that are hung from the toilet bowl can cause blockages. If you’re having a hard time fixing the toilet clogs, seek help from water remediation professionals.

Bathroom Vanity

If you have a leak, pay special attention to the cabinet’s interior because it’s a perfect spot for mold development. Check out the seals around the container carefully and replace any that are damaged right away.

If not handled soon, a slow drip can lead to far more damage than you would realize. If significant damage has already happened, your best solution is facing the bullet and getting a new bathroom vanity cabinet. In most cases, it’s more convenient than cleaning and repairing an existing cabinet. Are you having a hard time cleaning up water damage? Contact a disaster cleanup company to help you.

Pipes

Since most pipes are located inside the walls, indications of water damage are hard to find. However, pay special attention to dampness and discolorations on the flooring and walls, as they could indicate a hidden plumbing problem. Check the humidity levels in nearby rooms too.

Conclusion

So, check for any traces of moisture or water damage in the bathroom’s flooring and walls to see any sign of water damage. If you see some warping or discoloration, speak to a professional to ensure there isn’t a leak.

Also, don’t limit your search to the bathroom. Enter the areas that share the bathroom’s walls. The wet place may sometimes go through the opposite side of the wall, however, the problem is caused by a leaking bathroom pipe.

Bathrooms are common places subjected to regular water abuse and a high risk of water damage. Still, the expense and damage can be minimized if you comply with these few simple processes to avoid water damage.